|
Materials Guide
Composite Part
Fabrication
ADTECH
Plastic Systems manufactures top quality epoxy systems developed for use
in conjunction with a variety of reinforcing fabrics including fiberglass,
graphite, and Kevlarâ for composite tooling and part fabrication
applications. Our products range from low viscosity, room
temperature cure epoxies to high temperature, high performance resin
systems with a variety of open times, allowing the user greater
versatility for working with large or complex shapes. ADTECH’s
epoxy systems exhibit superior physical properties and impact resistance,
making them ideal for use in applications such as racing shells and
automotive bodies.
Individual listings
correspond to ADTECH's product numbering system. For your convenience a
descriptive phrase introduces each product, followed by a brief summary of
its features. For additional convenience and ready reference, a chart is
available through the link above which reflects handling characteristics
and physical properties.
Should you have any
application which requires properties "in between or beyond"
those noted, or you have a specific need, please contact our technical
staff by telephone (800) 255-9934 or EMail.
We welcome your inquiries and are prepared to assist you with special
solutions and/or custom formulations.
ADTECH also offers custom
engineering of system combinations, where surface coats and laminating
systems are designed to complement each other for optimum tooling
applications.
CER-112
Room Temp, Unfilled,
Moderate Work Life
CER-112-1 Room Temp, Unfilled, Fast Work Life
CER-112-2 Room Temp, Unfilled, Longer Work Life
CER-112-4 Room Temp, Unfilled, Higher Elongation
CER-112-5 Room Temp, Unfilled, Long Work Life
This series of resins offers a variety of work lives suitable for many
different applications. Features include low viscosity, a wide range of
physical properties, superior wet out and air release and enhanced
impact resistance. Designed for use with fiberglass, graphite and Kevlar
(Registered trademark of E.I. Dupont de Nemours).
EL-318 Room
Temp/Unfilled/Fire Retardant
20-30
Minutes
Amber
A room temperature wet lay up system with self extinguishing
characteristics that meet F.A.R. 25.853(a) of FAA standards. Recommended
for fabrication, replacement and repair in commercial aviation and
transport.
EL-318-1
Room Temp/Unfilled/Fire Retardant
2 hours
Amber
Long Pot Life. Room temperature wet lay up system with self
extinguishing characteristics that meet F.A.R. 25.853(a) of FAA
standards. Recommended for fabrication, replacement and repair in
commercial aviation and transport.
EL-335 High
Temp, High Impact
40-50 Minutes
Amber
High Impact. For use with Graphite Fabric. A graphite compatible system
designed for high performance use such as racing shells and automotive
bodies. Ideal for laminating with graphite fabrics. Offers superior
mechanical shock properties and performance at elevated temperatures,
with increased hardness, flexibility and stability.
EL-345-1 High Temp,
High Impact
15 Minutes
Amber
High Impact. For use with Graphite Fabric. A graphite compatible system
designed for high performance use such as racing shells and automotive
bodies. Ideal for laminating with graphite fabrics. Offers superior
mechanical shock properties and performance at elevated temperatures,
with increased hardness, flexibility and stability.
EL-345-2 High Temp,
High Impact
30 Minutes
Amber
High Impact. For use with Graphite Fabric. A graphite compatible system
designed for high performance use such as racing shells and automotive
bodies. Ideal for laminating with graphite fabrics. Offers superior
mechanical shock properties and performance at elevated temperatures,
with increased hardness, flexibility and stability.
Click
here for printable product chart
|