Individual listings correspond to
ADTECH's product numbering system. For your convenience a descriptive
phrase introduces each product, followed by a brief summary of its
features. For additional convenience and ready reference, a chart is
available through the link above which reflects handling characteristics
and physical properties.
Should you have any application which
requires properties "in between or beyond" those noted, or you
have a specific need, please contact our technical staff by telephone
(800)
255-9934 or EMail. We
welcome your inquiries and are prepared to assist you with special
solutions and/or custom formulations.
ADTECH also offers custom engineering of
system combinations, where surface coats and laminating systems are
designed to complement each other for optimum tooling
applications.
Room Temperature
ES-201-PC Room Temp,
Thixotropic
15 Minutes
White
Ideal for engineering tools, jigs and fixtures. A stable, thixotropic
material that features excellent handling characteristics. Machinable yet chip
resistant for the highest quality reproductions. Developed for use with EL-301,
EL-301-LP, EL-302-PC, EL-323-TC.
ES-204-SC Room Temp,
Silicon Carbide Filled
25 Minutes
Black
Designed to produce dimensionally stable, void-free duplications. Features
excellent abrasion resistance and very high physical properties. Developed for use
with EL-301, EL-301-LP, EL-302-PC, EL-323-TC.
ES-218 Room Temp,
Sandable
15 Minutes
White
A thixotropic, easy to mix system specifically designed for duplication work.
Its sandability makes it ideal for taking duplicates off of clay models and will
produce dimensionally stable tools. Developed for use with EL-301, EL-301-LP,
EL-302-PC, EL-323-TC.
High Temperature
ES-211 Hydrophobic, PFP
30-35 Minutes
White
A moderate work life system for coating plastic faced plasters or standard
applications. Produces accurate, detailed chip-resistant duplications. Heat
resistant to 285-310°F. Cures in the presence of water.
ES-215-IHG Long Work
Life (180-220 min.)
ES-215-1 Short Work Life (15-20 min.)
ES-215-2 Medium Work Life (80 min.)
Variable work life, very high temperature systems the meet the requirements of
the aircraft and aerospace industries. Offers proven compatibility with pre-pre
systems under high heat and vacuum bagging. Ideal for autoclave composite tools. Outstanding physical
properties qualify these systems on leading aircraft manufacturing specs. Developed
for use with EL-315 series, EL-326, EL-327, EL-336, EL-337, EL-325-HTTC.
ESG-215 High Temp
Graphite Filled Patching Paste
25-35 Minutes
Black
Developed to produce quality repairs of surface defects on autoclave tooling at
temperatures exceeding 400°F to meet the requirements of the aircraft and aerospace
industries. Also effective for minor engineering changes in high temperature tools
and dies. Compatible with ES-215, EL-315, pre-pregs.
ES-219 High Temp,
Aluminum Filled
30-40 Minutes
Gray
A thixotropic system that mixes easily, is brushable and will not sag.
Ideal for nearly all types of high temperature tooling applications. Constant
service temperatures of 310°F.
ES-220 High Temp,
Mineral Filled
30-35 Minutes
Black
An hydrophobic, thixotropic system that is easily mixed and brushes without sag.
Will perform at temperatures up to 310°F. Cures in the presence of
water.
ES-224 High Temperature Abrasion
Resistant Epoxy Surface Coat
60 Minutes
Gray (aluminum)
High Temp Surface Coat formulated for use in tooling applications where
increased wear resistance in a high temperature environment is required.
The abrasion resistance of ES-224 exhibits excellent handling
characteristics and air release, creating a tool surface with a high
degree of integrity and minute detail replication.