Individual listings correspond to
ADTECH's product numbering system. For your convenience a descriptive
phrase introduces each product, followed by a brief summary of its
features. For additional convenience and ready reference, a chart is
available through the link above which reflects handling characteristics
and physical properties.
Should you have any application which
requires properties "in between or beyond" those noted, or you
have a specific need, please contact our technical staff by telephone (800)
255-9934 or EMail. We
welcome your inquiries and are prepared to assist you with special
solutions and/or custom formulations.
ADTECH also offers custom engineering of
system combinations, where surface coats and laminating systems are
designed to complement each other for optimum tooling
applications.
Room Temperature
EL-301 Room Temp,
Unfilled
20-30 Minutes
EL-301-LP Room Temp, Unfilled, Long Pot Life
60 Minutes
Amber
Ideal systems for all types of room temperature laminating and close tolerance
tooling. Offers maximum wet-out, low viscosity, low odor and high physical
properties. Also serves as a good adhesive when cured in a thin film.
Developed for use with ES-201-PC, ES-204-SC, ES-218, EL-323-TC.
EL-302-PC Room Temp,
Improved Wet-Out
25-30 Minutes
White
This system offers low viscosity, high strength and superior
dimensional stability. Excellent for wet lay-ups, tooling and production. Developed for use with ES-201-PC, ES-204-SC, ES-218,
EL-323-TC
EL-318 Room
Temp/Unfilled/Fire Retardant
20-30 Minutes
Amber
A room temperature wet lay up system with self extinguishing characteristics that
meet F.A.R. 25.853(a) of FAA standards. Recommended for fabrication, replacement and
repair in commercial aviation and transport.
EL-318-1 Room
Temp/Unfilled/Fire Retardant
2 hours
Amber
Long Pot Life version of EL-318 room temperature wet lay up system with self extinguishing characteristics that
meet F.A.R. 25.853(a) of FAA standards. Recommended for fabrication, replacement and
repair in commercial aviation and transport.
EL-335 High
Temp, High Impact
40-50 Minutes
Amber
High Impact. For use with Graphite Fabric. A graphite compatible
system designed for high performance use such as racing shells and
automotive bodies. Ideal for laminating with graphite fabrics. Offers
superior mechanical shock properties and performance at elevated
temperatures, with increased hardness, flexibility and stability.
CER-112
Room Temp, Unfilled, Moderate Work Life
CER-112-1 Room Temp, Unfilled, Fast Work Life
CER-112-2 Room Temp, Unfilled, Longer Work Life
CER-112-4 Room Temp, Unfilled, Higher Elongation
CER-112-5 Room Temp, Unfilled, Long Work Life
This series of resins offers a variety of work lives suitable for many
different applications. Features include low viscosity, a wide range of
physical properties, superior wet out and air release and enhanced
impact resistance. Designed for use with fiberglass, graphite and Kevlar
(Registered trademark of E.I. Dupont de Nemours).
High Temperature
EL-315-IHL High
Temp, Graphite Filled - 50-75 Minutes
EL-315-1 High Temp - 50-60 Minutes
EL-315-2 High Temp, Extended Work Life - 180-210 Minutes
Amber
Ultimate high temp systems for both on and off model curing. Superior physical
properties. Use with confidence in heat environment to 218° C/425° F for tools,
jigs and fixtures. Contains no MDA or VCHD.
EL-315-IHL: Approved by leading aircraft manufacturers.
EL-315-2 Adequate work life for large tool construction. Developed for use with ES-215 Series.
EL-335 High
Temp, High Impact
40-50 Minutes
Amber
High Impact. For use with Graphite Fabric. A graphite compatible
system designed for high performance use such as racing shells and
automotive bodies. Ideal for laminating with graphite fabrics. Offers
superior mechanical shock properties and performance at elevated
temperatures, with increased hardness, flexibility and stability.
EL-336 High Temp,
Unfilled
35-50 Minutes
Amber
High temp unfilled epoxy laminating system specifically developed for room temp
hardening and high temp performance. Excellent handling, fabric wet-out and
physical property characteristics.
EL-337 High Temp,
Aluminum Filled
45-60
Minutes
Gray
High temp aluminum-filled epoxy laminating system specifically developed for
room temp hardening and high temp performance. Excellent handling, wet-out and
physical property characteristics.
Click here for printable product chart