Ultra Fair 861 is a convenient, easy to use fairing compound developed for
filling and fairing large surface imperfections in aluminum, steel, wood or fiberglass.
Ultra Fair 861 is formulated to provide a smooth, easily troweled paste that can be
applied up to 1-1/2" thick without sagging or shrinkage during cure. The white resin
and pink hardener, when mixed together at the convenient 1:1 mix ratio, provide a positive
mix indicator to assure the user a homogenous, well mixed system. Once cured,
Ultra Fair 861 produces a strong, resilient, blush-free surface that is easy to sand and will
accept virtually all types of primers and paints. note: This product is intended
to be used as supplied. it is not recommended that the material be thickened or
thinned, as altering the formulation may lower the physical properties.
Ultra Fair 861 55 minute work life at 77°F
Pro-fair epoxy
coating & fairing primer is a thixotropic compound specifically
formulated for applications above or below the water line. Pro-Fair offers a user friendly
mix ratio of 1:1 by weight or by volume and a moderate work life of 15-20 minutes.
Pro-Fair is a non-sagging putty that is ideally suited for a variety of major bonding
requirements. It is an excellent adhesive for bonding lead and fiberglass keels as well as
other types of equipment to the hull surface.
Pro-Seal
epoxy primer and coating system offers superior handling
characteristics, a choice of work life and excellent same day sanding characteristics.
Pro-Seal provides very good chemical resistance and can be used as a filler, being applied
by brush, squeegee or roller. Will typically fill the texture or weave in cloth in one
application. Can also be thinned with ADTECH 850 marine reducer resin when a sprayable
consistency is required.
Pro-Seal 15 15 minute work life at 77, F
Pro-Seal 60 60 minute work life at 77, F
Set-Fast
epoxy adhesive is a two component, liquid adhesive system with
excellent wetting and quick cure characteristics. This system features an easy 1:1
mix ratio, blue resin with yellow hardener, that when mixed, give a uniform translucent
green color as a positive mix indicator. The set-fast cure characteristics give a
4-6 minute work life at 77°F, however the system will cure at temperatures as low as 0°F
Universal repair filler
paste, the most versatile of all set fast filler pastes, Universal Repair
Filler is a two component system that yields a smooth, creamy, thixotropic paste with
superior handling characteristics and dimensional stability. Once applied, it cures to
form a rigid repair that can be machined, sanded and worked to a feather edge. Universal
Repair Filler will accept virtually all types of finishes without bleed out. Universal
Repair Filler offers the industry substantial savings in time and labor in addition to
providing a high quality finished repair.
Fiberbond
Repair filler paste is a very creamy, fiberglass filled material developed
for repairing large cracks and abrasions on your boat's deck, hull, keel or transom. The
fiberglass reinforcement makes this system ideal for heavy duty jobs requiring increased
impact strength and durability. Fiberbond Repair filler bonds readily to fiberglass, wood,
metal and most plastics, and is water resistant, so it can be used with confidence above
or below the water line.
No. 17 SMCR high heat resistant glazing putty
is a high heat resistant glazing putty developed for repairing small cracks or minor
surface imperfections in composite, aluminum or wooden boats. This thixotropic paste
repair material exhibits very low shrinkage and upon cure can withstand temperatures to
446° F. No. 17 SMCR has excellent adhesion to most epoxy. polyester and vinylester
composite materials as well as aluminum and wood, and will easily sand to a feather edge.
No.
77 high heat resistant filler and fairing compound offers the
user a smooth and workable paste with set-fast curing characteristics to expedite repair
and final finish applications. No. 77 is easier to sand than conventional fillers and will
readily bond to fiberglass, SMC, FRP, epoxy, graphite and Kevlar composites as well as
aluminum and wood. Heat resistance to 446° F.
No.
78 high heat resistant filler and fairing compound has all the
same great characteristics of our No. 77 set-fast filler paste, but with a lower density
and an extended work life that will allow the user to tackle larger areas in a single
application. Excellent adhesion to fiberglass, SMC, FRP, epoxy, graphite and Kevlar. Heat
resistance to 446° F. White