Universal repair filler
paste, the most versatile of all set fast filler pastes, Universal Repair
Filler is a two component system that yields a smooth, creamy, thixotropic paste with
superior handling characteristics and dimensional stability. Once applied, it cures to
form a rigid repair that can be machined, sanded and worked to a feather edge. Universal
Repair Filler will accept virtually all types of finishes without bleed out. Universal
Repair Filler offers the industry substantial savings in time and labor in addition to
providing a high quality finished repair.
Fiberbond
Repair filler paste is a very creamy, fiberglass filled material developed
for repairing large cracks and abrasions on your boat's deck, hull, keel or transom. The
fiberglass reinforcement makes this system ideal for heavy duty jobs requiring increased
impact strength and durability. Fiberbond Repair filler bonds readily to fiberglass, wood,
metal and most plastics, and is water resistant, so it can be used with confidence above
or below the water line.
No. 17 high heat resistant
filler is a high heat resistant glazing putty developed for repairing small cracks or minor
surface imperfections in composite, aluminum or wooden boats. This thixotropic paste
repair material exhibits very low shrinkage and upon cure can withstand temperatures to
446° F. No. 17 SMCR has excellent adhesion to most epoxy. polyester and vinylester
composite materials as well as aluminum and wood, and will easily sand to a feather edge.
No.
77 high heat resistant filler and fairing compound offers the
user a smooth and workable paste with set-fast curing characteristics to expedite repair
and final finish applications. No. 77 is easier to sand than conventional fillers and will
readily bond to fiberglass, SMC, FRP, epoxy, graphite and Kevlar composites as well as
aluminum and wood. Heat resistance to 446° F.
No.
78 high heat resistant filler and fairing compound has all the
same great characteristics of our No. 77 set-fast filler paste, but with a lower density
and an extended work life that will allow the user to tackle larger areas in a single
application. Excellent adhesion to fiberglass, SMC, FRP, epoxy, graphite and Kevlar. Heat
resistance to 446° F. White
Marine 880 fine grade
filler
(Cotton Flock)
A cotton flock filler used as a thickening agent to create a general purpose
adhesive.
Marine 881
high density filler
(Milled Fiber)
A maximum strength filler designed as a thickening agent for hardware bonding. When
mixed with epoxy, 881 can also be used filleting and gap filling where increased impact
resistance may be needed.
Marine 882
universal thickening agent
(Cab-o-sil)
The most versatile of the marine fillers. Can be used as a thickening agent to prevent
epoxy run off on a vertical surface, or with other fillers to control the working
characteristics of the epoxy. Can be used for bonding, filleting, gap-filling, or
increasing abrasion resistance.
Marine
883 low density filler
(Phenolic Microballoon)
Ideal for making lightweight putties for filleting, fairing and shaping. When used
with our "no-blush" epoxies, creates a smooth, trowelable paste that cures to a
sandable, paintable surface.
Marine 884
ultralight fairing additive
(Microbaloon Additive)
A low density filler for creating smooth, creamy fairing compounds when mixed with epoxy.
884 has excellent handling characteristics and is easily sanded when cured.