MR#1
Used in applications which require:
- Non-transfer of the release agent
- High temperature stability
- Abrasion resistance of the released film
- This film is micro-thin, stable, and becomes
functional immediately after cure. A water thin liquid ready for use
as supplied.
MR#2
Highly recommended as a parting layer between water-free polyester or
epoxy resins and mold surfaces
- Allow to dry to a smooth glossy film
- Film residue on parts can easily be rinsed with
water
- Not recommended to be used with phenolics or
urethanes
MR#7
Developed to work as a sealer in aluminum, polyester, or composite
molds/tools, and protect their working surfaces.
- Effective protection of mold surface, and fine
detailing
- Greatly enhance multiple cycle capability of
release agents
- Not recommended for silicones and waxes
MR#10
Specially formulated for processing reinforced polyester using metal,
composite, or polyester molds/tools. Excellent release of polyester resins
from various mold types
- High gloss finish, yet no "fish eyes"
- Easy to apply, rapid room temperature cure
- Single component therefore no mixing, or pot-life
limitations
- Multiple release capability. No mold build up, no
transfer or migration, and no silicones or waxes.