Individual listings correspond to
ADTECH's product numbering system. For your convenience a descriptive
phrase introduces each product, followed by a brief summary of its
features. For additional convenience and ready reference, a chart is
available through the link above which reflects handling characteristics
and physical properties.
Should you have any application which
requires properties "in between or beyond" those noted, or you
have a specific need, please contact our technical staff by telephone
(800)
255-9934 or EMail. We
welcome your inquiries and are prepared to assist you with special
solutions and/or custom formulations.
ADTECH also offers custom engineering of
system combinations, where surface coats and laminating systems are
designed to complement each other for optimum tooling
applications.
ESG-215 High Temp
Graphite Filled Patching Paste
25-35 Minutes
Black
Developed to produce quality repairs of surface defects on autoclave tooling at
temperatures exceeding 400°F to meet the requirements of the aircraft and aerospace
industries. Also effective for minor engineering changes in high temperature tools
and dies. Compatible with ES-215, EL-315, pre-pregs. Boeing MMS-101 & M41-03-01
ESR-217-AL High Temp
Surface Repair, Aluminum Filled
50-60 Minutes
Gray
An excellent material for making permanent repairs and engineering changes to
surfaces on high temperature tools and dies. Can be sanded or machined to leave and
undetectable repair.
No. 14 Ultra Filler
4 - 6 Minutes
White, Gray, Brown
Superior handling characteristics. A smooth creamy thixotropic paste of the
highest quality. Offers excellent strength and rigidity. Excellent adhesion to
nearly all substrates and can be finished to a feather edge.
Boeing Specs: MMS 101 CODE MD/J 3808 Code P1
No. 17 High Heat
Resistant Filler
4-6 Minutes
Gray, Black, White
Developed for use in tooling, fabrication and repair in the aerospace,
aircraft and automotive industries where elevated temperatures to 446°F
may
occur. Low mousture absorption also makes this an ideal filler/repair
material for the marine industry. Excellent bond strength to fiberglass,
SMC, BMC, RIM, FRP composites and other substrates. Accepts all types of
coatings without discoloration.